Keep the dock and deck looking great while reducing harmful chemical runoff!
The base structure for the Xanigo Marine Dock & Deck Cleaner formula is made from plants, which enables it to have 94% bio-content as certified by the USDA. This uses next-generation renewable biosurfactant technology, is regarded as readily biodegradable, and is high-performing with high efficacy. Does not contain: Palm Oil, 1, 4-Dioxane, Formaldehyde, Proposition 65 Chemicals, Sulfates, Sodium Hydroxide, Glycol Ethers, Phosphates, Phthalates, Parabens, and Ammonia
Instructions for Use:
For docks and decks, Xanigo Marine recommends a 1:5 to 1:20 dilution rate to enable proper cleaning. 1 gallon of Dock and Deck Cleaner to 5 to 20 gallons of water, depending on the job. This dilution ratio will provide effective cleaning power for composites, wood, and concrete
Use a proper deck and dock brush with a minimum 2" bristle. The stiffness of the bristle should be tested on the dock users are trying to clean to determine which is the most effective
For tough stains like blood, set-in bird drippings, or oils/greases, pour full strength into a spray bottle and spray the spots before scrubbing. After scrubbing the deck or dock, rinse with fresh water
Specifications:
Bottle Size: 1 gallon
The Complete Process to Treat and Prevent Mold & Mildew on Vinyl Boat Seats
Xanigo Marin’s Mold & Mildew Stain Remover is a very effective way to remove mold and mildew. Being a harsh chemical, it should only be used once to remove the mold, and then the preventer should be applied to prevent the mold from coming back. Liberally apply the Mold & Mildew Stain Remover to the seats. Let it sit for 60-90 seconds but do not let it dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.
STEP 2: Neutralize the Remover
After rinsing the remover off with fresh water, it's important to make sure any leftover remover is neutralized so it doesn't dry out vinyl or impact stitching. Spray the Waterless Wash onto the seats and wipe it in with a microfiber cloth to neutralize the chemicals in the remover.
With just one application, a boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond with the surface on which it is applied. Users can apply this to almost any marine surface, including vinyl seats, life jackets, canvas, ropes, compartments, live wells, bilges, patio furniture, and other areas of high moisture.
Spray the Mold & Mildew Preventer onto a clean, dry surface and spread it evenly with a microfiber cloth. Remember to spread, not wipe off.
STEP 4: Maintain Seats with Xanigo Marine's Waterless Wash
Keep the boat clean between mold prevention applications without the use of harsh chemicals or wasting water. Spray the Waterless Wash onto the seats, let it sit for 15-20 seconds, and wipe it off with a microfiber cloth. Remove sunscreen (a major food source for mold) and leave a refreshing smell without impacting the protective layer created by the mold & mildew preventer.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
Do you want to return the merchandise?
Return Policy:
Return Authorization numbers are required on all returned items. All returned units Must be Complete and in Factory Packaging. Please contact us to receive our Return Authorization Number and further instruction for return.
All returned units without Return Authorization number will be refused.
Packages must have RA number written visibly on the Shipping Label. All items must be returned in the original packaging and a new and resalable condition.
Damaged items: All claims on damaged goods must be made within 7 days of delivery to receive a return authorization via email or phone.
Non-Defective items: Within 30 days of invoice date, merchandises may be returned with a 15% restocking fee or more depending on ordered items
Defective items: Within 30 days of invoice date, the customer must first contact the manufacturer for a technical support to confirm the product is defective. Please provide the name of the technician at manufacturer, serial number, and the details about the defect via email. Return instructions will be provided afterward. After 30 days of invoice date, the defective items must be returned to manufacturer for the warranty repair.
Additional restocking fee will apply, depending on the items and/or the condition of returned items, for any damages or missing items.
All units requiring Service, either Warranty or otherwise, should be returned directly to the appropriate Manufacturer.
Electronic-Chart, Software, Video, Life-rafts, and Propellers are not returnable.
Shipping charges are not refundable.
We are not responsible for any shipping cost returning your purchase
Special orders and international orders, are not returnable.
Angler’s World is not responsible for lost packages in shipping, products damaged in shipping, any orders that are returned to any address other than the one listed above, or any order returned. It is advised that you insure your package when shipping back to us and have tracking codes.
For international shipping, please note that the customer will be responsible for all the shipping charges including return shipping fee and import tax, in case the package is refused.
All the products comes with US manufacturer's warranty.
Contact the Returns Department:
If, for any reason, you wish to return your order, please email us at support@anglersworld.com with your information (listed below). We will then provide you with return instructions and the return address. The return instructions will NOT be issued over the phone.
Your Name: Order Number: Your Address: Phone Number: Email Address: Reasons for requesting a return:
Again, you must be issued a RMA# and a return shipping address before you return your order.
Product has been added to your wishlist.
You can view your wishlist by creating or login account.
Please create account through ##customer_email## email